Code : 6002-008

• Round Insert End Mills

Specification รายละเอียด

• ขนาดเส้นผ่านศูนย์กลาง D : 35 MM.
• Shank ก้าน d Ø : 32 MM.
• ความยาว L : 150 MM.
• ความลึกสูงสุดของการกัด  R : 5 mm.
• Blade จำนวนเม็ดมีด : 3 PCS
• Insert รุ่นเม็ดมีด  : RDMT10T3

Code : 6002-082

• High Speed Shoulder Mills

Specification รายละเอียด

• ขนาดเส้นผ่านศูนย์กลาง D : 35 MM.
• Shank ก้าน d Ø : 32 MM.
• ความยาว L : 150 MM.
• กัดบ่าได้ (l)  : 14 mm.
• Blade จำนวนเม็ดมีด : 3 PCS
• Insert รุ่นเม็ดมีด  : APMT1604PDER MITSUBISHI

Code : 6002-132

• Ball End Mills

Specification รายละเอียด

• ขนาดเส้นผ่านศูนย์กลาง D : 25 MM.
• Shank ก้าน d Ø : 32 MM.
• ความยาว L : 200 MM.
• R : 12.5
• Blade จำนวนเม็ดมีด : 1 PCS
• Insert รุ่นเม็ดมีด  :ZPFW250

Code : 2003-081

• Tool Makers Vise
• Material Hardened: Sub-zero processing
• PARALLELISM 0.003 / 100 mm
• SQUARENESS 0.005 / 100 mm
• Angle tol: Within 15 sec Within 20 sec
• Material : SKS2
• Hardness : HRC 54º ±2º

Specifications ข้อมูลจำเพาะ

• ปากกว้าง Jaw C Open :80 mm.
• ความยาว A Length : 160 mm.
• ความสูง Height : 62 mm.
• น้ำหนัก Weight : 4.02 kg

Code : HV-8

• Horizontal -Vertical Rotary Table 8″

Dimension (mm)

Specifications ข้อมูลจำเพาะ

• Table dia.Ø 205mm. Table height 102 mm
• Center bore MT-3
• Load Capacity For Rotary Taple
– Horizontal : 80 kgs.
– Vertical : 40 kgs.
• Meas.CFT. 0.8 CUFT
• Gross weight. 24.7 kg

Download PDF

• 1 SCALE 0.01 mm 0.02 mm per Ø

• Here is a sturdy unit of extended boringrange, capable of peeling off heavy roughing cuts as well tool of extreme sensitivity.
• The use of a wide-base bar-holder resting securely on the body, eliminates the need for a separate side plate.

Code : VBC-3(m)

Dimension (mm)

* Actual Size 75 mm
* สามารถคว้านได้ Boring capacity : Ø10-Ø220 mm
* Boaring bar hole size : 18 mm
* Over all Length : 80 mm
* Center dist between holes : 23 mm
* Cross Hole dia ” 18 mm
* Offset : 25 mm
* Weight น้ำหนัก : 2 kg.

• 1 SCALE 0.01 mm 0.02 mm per Ø

• This wide base design is a recent Criterion innovation that increases bearing surfaces by 50% over the older models.

Code : VBC-2(m)

Dimension (mm)

* Actual Size 50 mm
* Boring capacity : Ø10 – Ø100 mm
* Boaring bar hole size : 12 mm
* Over all Length : 62 mm
* Center dist between holes : 15 mm
* Cross Hole dia ” 12 mm
* Offset : 15 mm
* Weight น้ำหนัก : 0.8 kg.

• 1 SCALE 0.01 mm 0.02 mm per Ø
• MAX. BORING DEPTH 50 MM

• The birect reading adjusting screw if ground affer hard-ening and a plainly marked dial face in nonreflecting satin chrome allows easy reading and adjustments of .005 or less.
• SHANK SIZE: NT-30,40,50, MT-3,4,5, R8

Code : VBHC-BC-3

Dimension (mm)

* Capacity Ø10-Ø220 mm

• 1 SCALE 0.01 mm 0.02 mm per Ø
• MAX. BORING DEPTH 50 MM

• The use of a wide base bar holder, resting securely on the body, eliminates the need for a separate side plate. You will note this has now become an integral part of the body.
• The birect reading adjusting screw if ground affer hard-ening and a plainly marked dial face in nonreflecting satin chrome allows easy reading and adjustments of .005 or less.
• All Criterion Boring Heads have threaded backs for use with a variety of shanks. His model takes a 1-1/2”-18 threaded shank.
• SHANK SIZE: NT-30,40,50, MT-3,4,5, R8

Code : VBHC-BC-2

Dimension (mm)

* Capacity Ø10-Ø110 mm

• SAME HEIGHT GUARANTEE
• BEST VISE DESIGN EVER

• Compact design. Great clamping capacity & rigid.
• “Toggle joint mechanism”. Provides a steady clamping force against shocks and vibrations during the operatioons, since it clamps the workpiece resiliently with an aid of the ?disc-springs? mounted inside.
• Strong clamping force.
• Large jaw stroke range.
• Exclusive Power Vise provide same height same position for horizontal and vertical MC, NC, Machine.
• Body is made of FCD60 high quaility ductile cast iron, resists deflection or bending.
• Sliding bed ways flame hardened and ground.
• Concealed spindle for protection against chips and dirt.
• Quick of clamping & locking and easy of operation.

Code : VQC-100,VQC-200L

Dimension (mm)

Clamping Capacity