Carbide End Mills | fntoolsshop

STK X-POWER Carbide End mill-Extra-Long EM827 Series 4 flutes

worachit — Mon, 30 Sep 2019 09:15:40 +0000

STK X-POWER Carbide End mill-Extra-Long 4 flutes

Code : EM827

• EM827 Series
• X-POWER For high Speed Cutting

• Material วัสดุ : Carbide +TiALN-COATE
• Flutes ฟันกัด : 4 Flutes
• Hardness : HRC 50° – 65 °
• Applicable on a large range of materials.
• STK X-POWER coating protect tools against premature wear, and extend tool life at extreme cutting condition.
• Superior workpiece finishes.

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter
EM827-0030	3	25	75	6
EM827-0040	4	31	75	6
EM827-0050	5	31	100	6
EM827-0060	6	38	100	6
EM827-0080	8	41	100	8
EM827-0100	10	45	100	10
EM827-0120	12	75	150	12
EM827-0160	16	75	150	16
EM827-0200	20	75	150	20

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE: Items without dimensions or prices. Please contact the salesman. Or request a quotation

The post STK X-POWER Carbide End mill-Extra-Long EM827 Series 4 flutes first appeared on fntoolsshop.

STK X-POWER Carbide End mill-Long Length EM817 Series 4 flutes

worachit — Mon, 30 Sep 2019 08:47:16 +0000

STK X-POWER Carbide End mill-Long Length 4 flutes

Code : EM817

• EM816 Series
• X-POWER For high Speed Cutting

• Material วัสดุ : Carbide +TiALN-COATE
• Flutes ฟันกัด : 2 Flutes
• Hardness : HRC 50° – 65 °
• Applicable on a large range of materials.
• STK X-POWER coating protect tools against premature wear, and extend tool life at extreme cutting condition.
• Superior workpiece finishes.

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter
EM817-0030	3	19	63	6
EM817-0040	4	19	63	6
EM817-0050	5	20	63	6
EM817-0060	6	28	76	6
EM817-0080	8	28	76	8
EM817-0100	10	34	90	10
EM817-0120	12	40	100	12
EM817-0140	14	50	110	14
EM817-0160	16	56	110	16
EM817-0180	18	56	110	18
EM817-0200	20	56	125	20
EM817-0250	25	75	140	25

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE: Items without dimensions or prices. Please contact the salesman. Or request a quotation

The post STK X-POWER Carbide End mill-Long Length EM817 Series 4 flutes first appeared on fntoolsshop.

STK X-POWER Carbide End mill-Long Length EM816 Series 2 flutes

worachit — Sun, 29 Sep 2019 13:44:39 +0000

STK X-POWER Carbide End mill-Long Length EM816 Series 2 flutes

Code : EM816

• EM816 Series
• X-POWER For high Speed Cutting

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter
EM816-0030	3	19	63	6
EM816-0040	4	19	63	6
EM816-0050	5	20	63	6
EM816-0060	6	28	76	6
EM816-0080	8	28	76	8
EM816-0100	10	34	90	10
EM816-0120	12	40	100	12
EM816-0140	14	50	110	14
EM816-0160	16	56	110	16
EM816-0180	18	56	110	18
EM816-0200	20	56	125	20
EM816-0250	25	75	140	25

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE: Items without dimensions or prices. Please contact the salesman. Or request a quotation

The post STK X-POWER Carbide End mill-Long Length EM816 Series 2 flutes first appeared on fntoolsshop.

STK X-POWER Carbide Roughing End mill Multi.flutes

worachit — Sun, 29 Sep 2019 13:05:06 +0000

STK X-POWER Carbide Roughing End mill Multi. flutes

Code : EM814

• EM814 Series
• X-POWER For high Speed Cutting

• Material วัสดุ : Carbide +TiALN-COATE
• Flutes ฟันกัด : 3,4 Flutes
• Hardness : HRC 50° – 65 °
• Applicable on a large range of materials.
• STK X-POWER coating protect tools against premature wear, and extend tool life at extreme cutting condition.
• Superior workpiece finishes.

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter	No.Of Flute
EM814-0040	4	11	55	6	3
EM814-0050	5	13	57	6	3
EM814-0060	6	16	57	6	3
EM814-0070	7	16	63	8	3
EM814-0080	8	16	63	8	3
EM814-0090	9	19	72	10	4
EM814-0100	10	22	72	10	4
EM814-0110	11	26	83	12	4
EM814-0120	12	26	83	12	4
EM814-0130	13	26	83	14	4
EM814-0140	14	26	83	14	4
EM814-0160	16	32	92	16	4
EM814-0180	18	32	92	18	4
EM814-0200	20	38	104	20	4
EM814-0250	25	45	121	25	5

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE : รายการที่ไม่มีขนาดหรือราคา โปรดติดต่อพนักงานขาย หรือ ขอใบเสนอราคา

The post STK X-POWER Carbide Roughing End mill Multi.flutes first appeared on fntoolsshop.

STK X-POWER Carbide Ball Nose End mill-Long Shank EM813 Series 2 flutes

worachit — Sun, 29 Sep 2019 12:17:08 +0000

STK X-POWER Carbide Ball Nose End mill-Long Shank EM813 Series 2 flutes

Code : EM813

• EM813 Series
• X-POWER For high Speed Cutting

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter
EM813-0010	1	2.5	50	4
EM813-0015	1.5	4	50	4
EM813-0020	2	5	50	6
EM813-0025	2.5	6	60	6
EM813-0030	3	8	60	6
EM813-0040	4	8	70	6
EM813-0050	5	10	80	6
EM813-0060	6	12	90	6
EM813-0070	7	14	90	8
EM813-0080	8	14	100	8
EM813-0090	9	18	100	10
EM813-0100	10	18	100	10
EM813-0120	12	22	110	12
EM813-0140	14	26	110	14
EM813-0160	16	30	140	16
EM813-0180	18	34	140	18
EM813-0200	20	38	160	20
EM813-0250	25	50	180	25

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE: Items without dimensions or prices. Please contact the salesman. Or request a quotation

The post STK X-POWER Carbide Ball Nose End mill-Long Shank EM813 Series 2 flutes first appeared on fntoolsshop.

STK X-POWER Carbide End mill EM811 Series 4 flutes

worachit — Sun, 29 Sep 2019 09:03:05 +0000

STK X-POWER Carbide End mill EM811 Series 4 flutes

Code : EM811

• EM811 Series
• X-POWER For high Speed Cutting

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter
EM811-0010	1	2.5	50	4
EM811-0015	1.5	4	50	4
EM811-0016	1.6	5	50	4
EM811-0018	1.8	5	50	4
EM811-0020	2	6	50	4
EM811-0025	2.5	8	50	4
EM811-0030	3	8	50	4
EM811-0035	3.5	10	50	8
EM811-0040	4	12	50	4
EM811-0045	4.5	12	50	6
EM811-0050	5	13	50	6
EM811-0055	5.5	13	50	6
EM811-0060	6	16	50	6
EM811-0070	7	16	63	8
EM811-0080	8	20	63	8
EM811-0090	9	20	70	10
EM811-0100	10	22	76	10
EM811-0110	11	22	76	12
EM811-0120	12	26	76	12
EM811-0140	14	26	85	16
EM811-0160	16	32	100	16
EM811-0180	18	32	100	20
EM811-0200	20	38	105	20
EM811-0225	25	45	120	25

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE: Items without dimensions or prices. Please contact the salesman. Or request a quotation

The post STK X-POWER Carbide End mill EM811 Series 4 flutes first appeared on fntoolsshop.

STK X-POWER Carbide End mill EM810 Series 2 flutes

worachit — Sun, 29 Sep 2019 06:48:52 +0000

STK X-POWER Carbide End mill EM810 Series 2 flutes

Code : EM810

• EM810 Series
• X-POWER For high Speed Cutting

Dimension (mm.)

Code No.	Mill Diameter	Length Of Cut	Overall Length	Shank Diameter
EM810-0003	0.3	0.6	38	3
EM810-0004	0.4	0.8	38	3
EM810-0005	0.5	1	38	3
EM810-0006	0.6	1.2	38	3
EM810-0007	0.7	1.4	38	3
EM810-0008	0.8	1.6	38	3
EM810-0009	0.9	1.8	38	3
EM810-0010	1	2.5	50	4
EM810-0011	1.1	2.5	50	4
EM810-0012	1.2	4	50	4
EM810-0013	1.3	4	50	4
EM810-0014	1.4	4	50	4
EM810-0015	1.5	4	50	4
EM810-0016	1.6	5	50	4
EM810-0018	1.8	5	50	4
EM810-0020	2	6	50	4
EM810-0025	2.5	8	50	4
EM810-0030	3	8	50	4
EM810-0035	3.5	10	50	8
EM810-0040	4	12	50	4
EM810-0045	4.5	12	50	6
EM810-0050	5	13	50	6
EM810-0060	6	16	50	6
EM810-0070	7	16	63	8
EM810-0080	8	20	63	8
EM810-0090	9	20	70	10
EM810-0100	10	22	76	10
EM810-0110	11	22	76	12
EM810-0120	12	26	76	12
EM810-0140	14	26	85	16
EM810-0160	16	32	100	16
EM810-0180	18	32	100	20
EM810-0200	20	38	105	20
EM810-0225	25	45	120	25

Tolerance according to DIN 7160 & 7161

		Tolerance range in μm / (μm)
		Nominal-Diameter in mm / (mm)
D	1 ~ 3	>3 ~ 6	>6 ~ 10	>10 ~ 18	>18 ~ 30
e8	-14 -28	-20 -38	-25 -47	-32 -59	-40 -73
h6	0 -6	0 -8	0 -9	0 -11	0 -13

NOTE: Items without dimensions or prices. Please contact the salesman. Or request a quotation

The post STK X-POWER Carbide End mill EM810 Series 2 flutes first appeared on fntoolsshop.

GS-Mill Long Neck 2 Flutes,Dia 0.2-6 mm

worachit — Mon, 08 Jul 2019 08:19:48 +0000

GS-Mill Long Neck 2 Flutes,Dia 0.2-6 mm

Code : LIST-9414

* Material: Carbide+GS Coating

* This end mill is the best in micro milling of die and mold steels.
* It can support every milling by abundant size arrangements.

Dimension (mm.)

Dia (mm.)	Length of Cut	O.A.L	L1	Shank	Dia (mm.)	Length of Cut	O.A.L	L1	Shank
0.2	0.3	45	0.5	4	0.8	1.2	60	24	4
0.2	0.3	45	1	4	0.9	1.4	45	6	4
0.2	0.3	45	1.5	4	0.9	1.4	50	8	4
0.3	0.4	45	1	4	0.9	1.4	50	10	4
0.3	0.4	45	2	4	1	1.5	50	4	4
0.3	0.4	45	3	4	1	1.5	50	6	4
0.3	0.4	45	6	4	1	1.5	50	8	4
0.3	0.4	45	9	4	1	1.5	50	10	4
0.4	0.6	45	2	4	1	1.5	50	12	4
0.4	0.6	45	3	4	1.2	1.8	50	6	4
0.4	0.6	45	4	4	1.2	1.8	50	8	4
0.4	0.6	45	8	4	1.2	1.8	50	10	4
0.4	0.6	45	12	4	1.2	1.8	50	12	4
0.5	0.7	45	2	4	1.2	1.8	60	16	4
0.5	0.7	45	4	4	1.5	2.3	50	6	4
0.5	0.7	45	6	4	1.5	2.3	50	8	4
0.5	0.7	50	8	4	1.5	2.3	50	10	4
0.5	0.7	50	10	4	1.5	2.3	50	12	4
0.5	0.7	50	15	4	2	3	50	6	4
0.6	0.9	45	2	4	2	3	50	8	4
0.6	0.9	45	4	4	2	3	50	10	4
0.6	0.9	45	6	4	2	3	50	12	4
0.6	0.9	50	8	4	2	3	60	14	4
0.6	0.9	50	10	4	2	3	60	16	4
0.6	0.9	50	12	4	2	3	60	18	4
0.6	0.9	50	18	4	2	3	60	20	4
0.7	1	45	2	4	2	3	70	25	4
0.7	1	45	4	4	2	3	70	30	4
0.7	1	45	6	4	2.5	3.7	50	8	4
0.7	1	50	8	4	2.5	3.7	50	12	4
0.7	1	50	10	4	2.5	3.7	60	16	4
0.8	1.2	50	8	4	2.5	3.7	60	20	4
0.8	1.2	50	10	4	2.5	3.7	70	25	4
0.8	1.2	50	12	4	2.5	3.7	70	30	4
0.8	1.2	50	16	4	2.5	3.7	90	40	4

NOTE : รายการที่ไม่มีขนาดหรือราคา โปรดติดต่อพนักงานขาย หรือ ขอใบเสนอราคา

The post GS-Mill Long Neck 2 Flutes,Dia 0.2-6 mm first appeared on fntoolsshop.

X’s-Mill Series End Mills 2 Flutes List-9470,dia 1-20 mm

worachit — Mon, 08 Jul 2019 06:56:29 +0000

เอ็นมิลทังสเตนคาร์ไบท์เคลือบ X’s / X’s-Mill Series End Mills 2 Flutes

Code : List-9470

* Material วัสดุ : CARBIDE+X’s Coating
* JIS standard
* Micro grain carbide with multi-layer of new platina coating.
* Suitable for hardened steel up to 55HRC & high speed milling of more than 300 m/min

Dimension (mm.)

Model No.	Dia (mm.)	Length of Cut	Over all Length	Shank
LIST-9470-1.0	1	3	40	4
LIST-9470-1.5	1.5	4	40	4
LIST-9470-2.0	2	6	40	4
LIST-9470-2.5	2.5	8	40	4
LIST-9470-3.0	3	8	45	6
LIST-9470-3.5	3.5	10	45	6
LIST-9470-4.0	4	11	45	6
LIST-9470-4.5	4.5	11	50	6
LIST-9470-5.0	5	13	50	6
LIST-9470-5.5	5.5	13	50	6
LIST-9470-6.0	6	13	50	6
LIST-9470-6.5	6.5	16	60	8
LIST-9470-7.0	7	16	60	8
LIST-9470-7.5	7.5	16	60	8
LIST-9470-8.0	8	19	60	8
LIST-9470-8.5	8.5	19	70	10
LIST-9470-9.0	9	19	70	10
LIST-9470-9.5	9.5	19	70	10
LIST-9470-10.0	10	22	70	10
LIST-9470-11.0	11	22	75	12
LIST-9470-12.0	12	26	75	12
LIST-9470-13.0	13	26	75	12
LIST-9470-14.0	14	26	90	16
LIST-9470-15.0	15	32	90	16
LIST-9470-16.0	16	32	90	16
LIST-9470-18.0	18	32	100	20
LIST-9470-20.0	20	38	100	20

NOTE: There is no price list Please contact your sales representative or request a quotation.

Download PDF

The post X’s-Mill Series End Mills 2 Flutes List-9470,dia 1-20 mm first appeared on fntoolsshop.

X’s-Mill 4 Flutes LIST-9472,Dia 2-20 mm

worachit — Mon, 08 Jul 2019 00:56:32 +0000

เอ็นมิลทังสเตนคาร์ไบท์เคลือบ X’s-Mill 4 Flutes

Code : LIST-9472

* Material วัสดุ : CARBIDE+X’s

* JIS standard

* This end mill is suitable for high-speed and long life milling of work piece materials from raw materials to hardened materials.

Dimension (mm.)

Model No.	Diamiter Ø D	Length of Cut l	Over All Length L	Shank. Ø d
LIST-9472-2.0	2	6	40	4
LIST-9472-2.5	2.5	8	40	4
LIST-9472-3.0	3	8	45	6
LIST-9472–3.5	3.5	10	45	6
LIST-9472-4.0	4	11	45	6
LIST-9472-4.5	4.5	11	50	6
LIST-9472-5.0	5	13	50	6
LIST-9472-5.5	5.5	13	50	6
LIST-9472-6.0	6	13	50	6
LIST-9472-6.5	6.5	16	60	8
LIST-9472-7.0	7	16	60	8
LIST-9472-7.5	7.5	16	60	8
LIST-9472-8.0	8	19	60	8
LIST-9472-8.5	8.5	19	70	10
LIST-9472-9.0	9	19	70	10
LIST-9472-9.5	9.5	19	70	10
LIST-9472-10.0	10	22	70	10
LIST-9472-11.0	11	22	75	12
LIST-9472-12.0	12	26	75	12
LIST-9472-13.0	13	26	75	12
LIST-9472-14.0	14	26	90	16
LIST-9472-15.0	15	26	90	16
LIST-9472-16.0	16	26	90	16
LIST-9472-18.0	18	32	100	20
LIST-9472-20.0	20	38	100	20

NOTE: Items with no price Please contact the salesperson. Or request a quotation

Download PDF

The post X’s-Mill 4 Flutes LIST-9472,Dia 2-20 mm first appeared on fntoolsshop.

Dia (mm.)	Length of Cut	O.A.L	L1	Shank	Dia (mm.)	Length of Cut	O.A.L	L1	Shank
0.2	0.3	45	0.5	4	0.8	1.2	60	24	4
0.2	0.3	45	1	4	0.9	1.4	45	6	4
0.2	0.3	45	1.5	4	0.9	1.4	50	8	4
0.3	0.4	45	1	4	0.9	1.4	50	10	4
0.3	0.4	45	2	4	1	1.5	50	4	4
0.3	0.4	45	3	4	1	1.5	50	6	4
0.3	0.4	45	6	4	1	1.5	50	8	4
0.3	0.4	45	9	4	1	1.5	50	10	4
0.4	0.6	45	2	4	1	1.5	50	12	4
0.4	0.6	45	3	4	1.2	1.8	50	6	4
0.4	0.6	45	4	4	1.2	1.8	50	8	4
0.4	0.6	45	8	4	1.2	1.8	50	10	4
0.4	0.6	45	12	4	1.2	1.8	50	12	4
0.5	0.7	45	2	4	1.2	1.8	60	16	4
0.5	0.7	45	4	4	1.5	2.3	50	6	4
0.5	0.7	45	6	4	1.5	2.3	50	8	4
0.5	0.7	50	8	4	1.5	2.3	50	10	4
0.5	0.7	50	10	4	1.5	2.3	50	12	4
0.5	0.7	50	15	4	2	3	50	6	4
0.6	0.9	45	2	4	2	3	50	8	4
0.6	0.9	45	4	4	2	3	50	10	4
0.6	0.9	45	6	4	2	3	50	12	4
0.6	0.9	50	8	4	2	3	60	14	4
0.6	0.9	50	10	4	2	3	60	16	4
0.6	0.9	50	12	4	2	3	60	18	4
0.6	0.9	50	18	4	2	3	60	20	4
0.7	1	45	2	4	2	3	70	25	4
0.7	1	45	4	4	2	3	70	30	4
0.7	1	45	6	4	2.5	3.7	50	8	4
0.7	1	50	8	4	2.5	3.7	50	12	4
0.7	1	50	10	4	2.5	3.7	60	16	4
0.8	1.2	50	8	4	2.5	3.7	60	20	4
0.8	1.2	50	10	4	2.5	3.7	70	25	4
0.8	1.2	50	12	4	2.5	3.7	70	30	4
0.8	1.2	50	16	4	2.5	3.7	90	40	4

Dia (mm.)	Length of Cut	O.A.L	L1	Shank	Dia (mm.)	Length of Cut	O.A.L	L1	Shank
0.2	0.3	45	0.5	4	0.8	1.2	60	24	4
0.2	0.3	45	1	4	0.9	1.4	45	6	4
0.2	0.3	45	1.5	4	0.9	1.4	50	8	4
0.3	0.4	45	1	4	0.9	1.4	50	10	4
0.3	0.4	45	2	4	1	1.5	50	4	4
0.3	0.4	45	3	4	1	1.5	50	6	4
0.3	0.4	45	6	4	1	1.5	50	8	4
0.3	0.4	45	9	4	1	1.5	50	10	4
0.4	0.6	45	2	4	1	1.5	50	12	4
0.4	0.6	45	3	4	1.2	1.8	50	6	4
0.4	0.6	45	4	4	1.2	1.8	50	8	4
0.4	0.6	45	8	4	1.2	1.8	50	10	4
0.4	0.6	45	12	4	1.2	1.8	50	12	4
0.5	0.7	45	2	4	1.2	1.8	60	16	4
0.5	0.7	45	4	4	1.5	2.3	50	6	4
0.5	0.7	45	6	4	1.5	2.3	50	8	4
0.5	0.7	50	8	4	1.5	2.3	50	10	4
0.5	0.7	50	10	4	1.5	2.3	50	12	4
0.5	0.7	50	15	4	2	3	50	6	4
0.6	0.9	45	2	4	2	3	50	8	4
0.6	0.9	45	4	4	2	3	50	10	4
0.6	0.9	45	6	4	2	3	50	12	4
0.6	0.9	50	8	4	2	3	60	14	4
0.6	0.9	50	10	4	2	3	60	16	4
0.6	0.9	50	12	4	2	3	60	18	4
0.6	0.9	50	18	4	2	3	60	20	4
0.7	1	45	2	4	2	3	70	25	4
0.7	1	45	4	4	2	3	70	30	4
0.7	1	45	6	4	2.5	3.7	50	8	4
0.7	1	50	8	4	2.5	3.7	50	12	4
0.7	1	50	10	4	2.5	3.7	60	16	4
0.8	1.2	50	8	4	2.5	3.7	60	20	4
0.8	1.2	50	10	4	2.5	3.7	70	25	4
0.8	1.2	50	12	4	2.5	3.7	70	30	4
0.8	1.2	50	16	4	2.5	3.7	90	40	4

Carbide End Mills | fntoolsshop

STK X-POWER Carbide End mill-Extra-Long EM827 Series 4 flutes

• EM827 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

STK X-POWER Carbide End mill-Long Length EM817 Series 4 flutes

• EM816 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

STK X-POWER Carbide End mill-Long Length EM816 Series 2 flutes

• EM816 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

STK X-POWER Carbide Roughing End mill Multi.flutes

• EM814 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

STK X-POWER Carbide Ball Nose End mill-Long Shank EM813 Series 2 flutes

• EM813 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

STK X-POWER Carbide End mill EM811 Series 4 flutes

• EM811 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

STK X-POWER Carbide End mill EM810 Series 2 flutes

• EM810 Series • X-POWER For high Speed Cutting

Tolerance according to DIN 7160 & 7161

GS-Mill Long Neck 2 Flutes,Dia 0.2-6 mm

X’s-Mill Series End Mills 2 Flutes List-9470,dia 1-20 mm

X’s-Mill 4 Flutes LIST-9472,Dia 2-20 mm

• EM827 Series
• X-POWER For high Speed Cutting

• EM816 Series
• X-POWER For high Speed Cutting

• EM816 Series
• X-POWER For high Speed Cutting

• EM814 Series
• X-POWER For high Speed Cutting

• EM813 Series
• X-POWER For high Speed Cutting

• EM811 Series
• X-POWER For high Speed Cutting

• EM810 Series
• X-POWER For high Speed Cutting

Dia (mm.)	Length of Cut	O.A.L	L1	Shank	Dia (mm.)	Length of Cut	O.A.L	L1	Shank
0.2	0.3	45	0.5	4	0.8	1.2	60	24	4
0.2	0.3	45	1	4	0.9	1.4	45	6	4
0.2	0.3	45	1.5	4	0.9	1.4	50	8	4
0.3	0.4	45	1	4	0.9	1.4	50	10	4
0.3	0.4	45	2	4	1	1.5	50	4	4
0.3	0.4	45	3	4	1	1.5	50	6	4
0.3	0.4	45	6	4	1	1.5	50	8	4
0.3	0.4	45	9	4	1	1.5	50	10	4
0.4	0.6	45	2	4	1	1.5	50	12	4
0.4	0.6	45	3	4	1.2	1.8	50	6	4
0.4	0.6	45	4	4	1.2	1.8	50	8	4
0.4	0.6	45	8	4	1.2	1.8	50	10	4
0.4	0.6	45	12	4	1.2	1.8	50	12	4
0.5	0.7	45	2	4	1.2	1.8	60	16	4
0.5	0.7	45	4	4	1.5	2.3	50	6	4
0.5	0.7	45	6	4	1.5	2.3	50	8	4
0.5	0.7	50	8	4	1.5	2.3	50	10	4
0.5	0.7	50	10	4	1.5	2.3	50	12	4
0.5	0.7	50	15	4	2	3	50	6	4
0.6	0.9	45	2	4	2	3	50	8	4
0.6	0.9	45	4	4	2	3	50	10	4
0.6	0.9	45	6	4	2	3	50	12	4
0.6	0.9	50	8	4	2	3	60	14	4
0.6	0.9	50	10	4	2	3	60	16	4
0.6	0.9	50	12	4	2	3	60	18	4
0.6	0.9	50	18	4	2	3	60	20	4
0.7	1	45	2	4	2	3	70	25	4
0.7	1	45	4	4	2	3	70	30	4
0.7	1	45	6	4	2.5	3.7	50	8	4
0.7	1	50	8	4	2.5	3.7	50	12	4
0.7	1	50	10	4	2.5	3.7	60	16	4
0.8	1.2	50	8	4	2.5	3.7	60	20	4
0.8	1.2	50	10	4	2.5	3.7	70	25	4
0.8	1.2	50	12	4	2.5	3.7	70	30	4
0.8	1.2	50	16	4	2.5	3.7	90	40	4