Code : 2002-010

• Punch Grinder
• STANDARD TYPE
• Outside Diameter : 1.5-25 mm

Specifications ข้อมูลจำเพาะ

• เจียร์พั้นซ์กลม ขนาด Ø 1.5-25 มิล
• Accuracy of point A within 0.005mm. and poit B Within 0.008mm. while turning.
• Weight น้ำหนัก : 6.6 kg.

Model : V-PGA

• เครื่องเจียรพั้นช์ขนาดเล็กสามารถดำเนินการจากขนาดเส้นผ่าศูนย์กลาง 0.5 มม. ถึง 6 มม. หากความยาวของชิ้นงานประมาณ 10 มม. ซึ่งสามารถเจียรได้
• เครื่องเจียร์พั้นช์นี้สามารถทำงานร่วมกับเครื่องขัดผิวและการเจียรขนาดใดก็ได้
• ใช้งานง่ายและมีความแม่นยำสูงทำให้เป็นเครื่องมือบดเจียร์ที่ดีที่สุดสำหรับชิ้นงานขนาดเล็ก

Dimension (mm)

Model : V-PGM

• Outside Diameter : 1.5-25 mm
• Motor 25 W.,50Hz/220V.,129 rpm.

• High accuracy cylindrical grinding work possible just by putting this economical unit on surface grinder.
• No center alignment necessary. just put work on rollers.
• Portable with single hand, thus easily set on grinding.
• With rollers motor-driven attention can be concentrated on table/wheel feeds.
• Work can be formed in radius taper as well
• Double roller unit available for long pin or punch grinding.

Dimension (mm)

Model : V-PGS

• MINI TYPE
• Outside Diameter : 1.5-3 mm

• This is a mini type punch grinder which can grind fine punch of outside diameter from 1.5mm to 3mm.
• Accuracy of point A within 0.005mm and point B Within 0.008mm while turning.

Dimension (mm)

Model : V-PS

• Max.Wheel D. Ø200 mm
• Center height : 80~81mm
• Clamping diameter: 4~30mm

• V-PS can pass through from itself to the center of grip,in case of facing a more longer punch ejector pin,it can go deep into of the grip position directly.
• To assembl an ARM with the main body, any combination of radil form of the grinding wheel may be dressed accuratrly by easy operation.

Dimension (mm)

Application grinding wheel style

Code :  V-PB

• Max.Wheel D. Ø200 mm
• Roller Center H. 80 mm
• Head Slide Movement, 12.5 mm

• Punch former is the fixture to grind the point of standard punches and E.D.M. electrodes for precise and fast operation.
• Besides the round, radius and multiangle punches, any special forms can be ground precisely.
• By using this attachment, it can be ground either concave or convex radius shape.
• The capacity is from 4mm to 30mm.
• Punch Former is the great dressing instrument.
• Precisely forming the grinding wheel can be done by assembling an ARM with the main body. Any combination of tangents or radil form of the grinding wheel may be dressed accurately by easy operation.
• Max.diameter of grinding wheel within 200mm. can be dressed accurately and safely.
• The height from base to roller’s center is 80 mm.Movement of each side can reach 12.5mm while aiming at the center of V block.
The main body may be of one piece steel construction.

Dimension (mm)

Application grinding wheel style