VERTEX HV-8 Horizontal -Vertical Rotary Table 8″
• Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness.
• Use excellent machining center to process.
• Spindle end be applied accuracy bearing.
• Can be assured to keep very steady under load cutting.
• Worm is hardened and ground. The ratio is 90:1.
• The work table is graduateda full 360° so that one turn of the handle moves the table through 4°.
Product Description
VERTEX HV-8 Horizontal -Vertical Rotary Table 8″
Code : HV-8
• Horizontal -Vertical Rotary Table 8″
Dimension (mm)
A1 | D | H | H1 | A | B | e | g |
---|---|---|---|---|---|---|---|
100 | 205 | 102 | 135 | 265 | 219 | 14 | 17 |
Specifications ข้อมูลจำเพาะ
• Table dia.Ø 205mm. Table height 102 mm
• Center bore MT-3
• Load Capacity For Rotary Taple
– Horizontal : 80 kgs.
– Vertical : 40 kgs.
• Meas.CFT. 0.8 CUFT
• Gross weight. 24.7 kg
ITEM NO. | TESTING OBJECTIVE | VARIATION(INCHES)(MM) MAXIMUM TESTED |
---|---|---|
1 | FLATNESS OF CLAMPING SURFACE(CONCAVE) | .0006(0.015) |
2 | PARALLELISM OF CLAMPING SURFACE TO BASE | .0008(0.0.02) |
3 | SQUARENESS OF CLAMPING SURFACE TO ANGLE FACE | .0008(0.0.02) |
4 | TRUE RUNNING OF CLAMPING SURFACE | .0006(0.015) |
5 | TURE RUNNING OF CENTER HOLE MEASURED AT HOLE EDGE | .0008(0.0.02) |
6 | INDEXING ACCURACY OF DIRECT INDEXING MECHANISM MAXIMUM CUMULATIVE SPACING ERROR | 45" |
► Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness. |
► Use excellent machining center to process. Spindle end be applied accuracy bearing. Can be assured to keep very steady under load cutting. |
► Worm is hardened and ground. The ratio is 90:1. The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min. And vernier scale makes settings down to 10 seconds possible. |
► These Rotary Tables are popular for their excellent perfor-mance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work. |
► Using the Key guide block, the center can be corrected quickly and accurately. |
น้ำหนัก | 24.7 kg |
---|
There are no reviews yet.