VPS-32 Touch Point Sensor Optical Type
• High sensitivity position sensor.
• Red pilot can be seen clearly.
• Whole travel of red pilot is sparkling, detecting also can be done during turning while spindle stops.
Product Description
VPS-32 Touch Point Sensor Optical Type
Code : VPS-32
• Optical Type
• High sensitivity position sensor.
• Red pilot can be seen clearly.
• Whole travel of red pilot is sparkling, detecting also can be done during turning while spindle stops.
• Location of end surface, outter circle dia.,inner circle dia. of the workpiece for processing can be detected with full effect.
• Deviced with safety line excess, ball supported by spring, so even line
• The precision will reach up to micrometer while the ball returns to center position.
• Edge Finder
• Accuracy:Within ±0.005mm
Dimension (mm)
Specification ข้อมูลจำเพาะ
• High sensitivity position sensor. |
• Red pilot can be seen clearly. |
• Whole travel of red pilot is sparkling, detecting also can be done during turning while spindle stops. |
• Location of end surface, outter circle dia.,inner circle dia. of the workpiece for processing can be detected with full effect. |
• Deviced with safety line excess, ball supported by spring, so even line |
• The precision will reach up to micrometer while the ball returns to center position. |
• Edge Finder |
• Accuracy:Within ±0.005mm |
* After Reading the Following instruction,please use touch point sensor correctly due to it’s a highly sensitive position detector. Don’t Rotate the touch point sensor while using it. |
1.Install BATTERY Take off the screw cover and insert batteries correctly.Do not insert batteries upside down. |
2.CONFIRMATION OF LIGHTING CHECK the lighting of red lamp by touching A-B part with a metal (clip,L-PLATE etc.) |
3.MEASURING METHOD As soon as the ball (outside dia.10mmø)touches the work piece with the main spindle stopped,The red lamp lights on. |
น้ำหนัก | 0.7 kg |
---|
There are no reviews yet.