Currently Empty: 0.00฿
-4,780.00฿
-5,324.00฿
-11,090.00฿
CS_Super indexing spacer with 3 jaw chuck 6″
• ใช้งานง่าย ใช้ได้ทั้งแนวตั้งและแนวนอน
• แบ่งองศาได้เที่ยงตรง
Hydraulic Machine Vise,Power Build out type 5″
• For multiple use plural vises are available on tolerance of 0.01mm in the height of vise bed and in alignment of the clamping surface of the vise jaw at extra cost.
-12,740.00฿
Hydraulic Machine Vise,Power Build out type 6″
• For multiple use plural vises are available on tolerance of 0.01mm in the height of vise bed and in alignment of the clamping surface of the vise jaw at extra cost.
VERTEX B-Type Milling Vise Capacity 100 mm
• A wider bottom to increase clamping force.
• Groove device to collect cutting oil.
• Full 360º swivel base with line,
• accurate graduation.
VERTEX B-Type Milling Vise Capacity 132 mm
• A wider bottom to increase clamping force.
• Groove device to collect cutting oil.
• Full 360º swivel base with line,
• accurate graduatio
VERTEX BS-0-J-5 Semi-universal Dividing Head with 3 Jaw Chuck 5″
• Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40:1.
• Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
• The swivel head can be locked of any angle from 10˚ below horizontal to 90˚ vertical-precision fitting to base assures smooth rotation.
• All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2,3,4,6,8,12, and 24.
• Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
• Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotati
• Made in taiwan
-3,885.00฿
VERTEX HV-6 Horizontal -Vertical Rotary Table 6″
• Worm is hardened and ground. The ratio is 90:1.
• The work table is graduateda full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1’min.
• And vernier scale makes settings down to 10 seconds possible.
-6,475.00฿
VERTEX HV-8 Horizontal -Vertical Rotary Table 8″
• Our Tables are made of high density Meehanite and use “HEIDENHAIN” electronic equipment to inspect angle to assure the excellent quality and durableness.
• Use excellent machining center to process.
• Spindle end be applied accuracy bearing.
• Can be assured to keep very steady under load cutting.
• Worm is hardened and ground. The ratio is 90:1.
• The work table is graduateda full 360° so that one turn of the handle moves the table through 4°.
VERTEX K-Type Milling vise 6″
• It’s a practical piece of equipment with excellent precision and a high quality finished.
• It’s the most suitable for the Milling, Grinding and Drilling.
• Made in taiwan