ดูตะกร้าสินค้า เพิ่ม “VSA-25K แท่นรองเครื่อง รับน้ำหนักได้ 22KN” ในตะกร้าเรียบร้อย
VERTEX CS-6 หัวแบ่ง แบบ SUPER พร้อมสามจับ 6 นิ้ว
• หัวแบ่ง ซุปเปอร์ พัฒนาจากรุ่นธรรมดา มีการเพิ่มด้ามหมุน wormgearและ แผ่นหน้า faceplate เข้ามา นอกจากนั้นจะทำงานเหมือนรุ่นเดิมคือ ใช้งานได้ง่าย
• สามารถยังใช้ร่วมกับเครื่อง มิลลิ่ง หรือ เครื่องเจาะ สามจับที่ตืดตั้งมาเป็นรุ่นรูทะลุที่ใหญ่พิเศษ เหมาะสำหรับการทำงานลักษณะยาว
• ใช้งานง่าย ใช้ได้ทั้งแนวตั้งและแนวนอน
• แบ่งองศาได้เที่ยงตรง
Product Description
VERTEX CS-6 หัวแบ่ง แบบ SUPER พร้อมสามจับ 6 นิ้ว
Code : 1001-060
• Super indexing spacer with 3 jaw chuck 6″
Specifications ข้อมูลจำเพาะ
• Numbers of : 2 , 3 ,4 , 6 ,8, 12 , 24
• Chuck Through Hole
– Outer diameter : 167 mm. (VSK-6A)
– Inner jaw : 4∼42 mm.
– Outer jaw : 10∼156 mm.
– Inner dia : 44 mm.
• Face plate
– Outer dia : 203 mm.
– Thickness : 50
• Meas. CFT : 1.2
• Weight : 44.5 kg.
STANDARD ACCESSORIES
OPTIONAL The chuck fixing hole is from front.
► This index combines the advantages of the Super Index with those of a worm-geared index.When mounted on a milling, boring or other machine tool it can carry out single-purpose indexing and indirect indexing using the worm-drive mechanism. |
► Disengaging the worm drive the 24-notch master plate permits 2,3,4,6,8,12 and 24 dividing in the same manner as the Simple Index. |
► When the chuck is removed, the unit can be used as a horizontal and vertical type rotary table. The operating handle to rotary table worm gear reduction ration is 1:90. |
The operating handle collar is graduated in in one minute, and readings down to ten seconds can be set on the vernier. |
น้ำหนัก | 44.5 kg |
---|
There are no reviews yet.